A car battery is not indestructible. Once you buy it, it will serve you for a more extended period, but that doesn't mean that it won't die with time. One of the worst things that could happen is for your car to stop working. Unfortunately, you can't predict when the battery will die altogether and you have to jump start car, but it is essential to have regular checks inside the trunk to see if you can prevent a problem. Most people don't do this because they simply forget or they don't know anything about auto-mechanics.
Moreover, if the battery dies, it doesn't mean that you have to throw it right away. Jumpstarting a car is practical as well. This means that you can get the battery to start working again. Before you know it, you're back on the road enjoying a problem-free ride. Click on the link for more information https://www.wikihow.com/Jump-Start-a-Car.
However, you should follow specific steps to get the vehicle going again. Some don't know them and feel hopeless, but it's always beneficial to know things that regard your vehicle. You can end up making the best out of a bad situation. For the jumpstarting process to be a success, here's what you'll have to do:
Use Jumper Cables
Before you start the process, make sure that you use another vehicle so that the procedure can be completed. This means that you should ask for help from a person with a fully functioning vehicle to assist you. You’ll have to use their battery in order for yours to start working again. Also, park the two cars very close to one another so that the batteries can be close as well. The cables assisting the procedure are not very long. Therefore you’ll need close proximity.
Every car owner must know that keeping a spare set of cables is absolutely necessary. You can’t know when something like this would happen and where it would happen. Having jumper cables in the trunk can save your life. There are basically red and black jumper cables. You can find out more about jumpstarting cars if you learn from BatteryManGuide.
Moreover, the red ones have to be connected to the positive terminals of both batteries. If you make a mistake, then the car won't start at all. The black or negative ones are used for other things. The first one is used to combine with the negative terminal of the active battery. The second one, you have to attach it to a metal surface under your hood. After connecting absolutely everything, you can start your vehicle once more.
If it powers up, leave it on for some time so that the device can recharge once more. If nothing works, then buy a new battery.
Push Starting the Car
This method might be less effective, but you won't lose anything by trying it. Basically, you have to find a clear road ahead to push the vehicle. Then you'll have to depress the clutch and put the auto into first gear. Then the ignition has to be turned on, and you'll have to take your foot off the brake. This will make the clutch fully depressed.
After you reach 5-7 miles per hour, you have to let go of the clutch and feel the engine starting to turn. If by any chance it doesn’t start immediately, then repeat the process once again. If it starts right from the start, then shift it to neutral and press the accelerator. It is important to charge it as well. Click here for more.
This process, as mentioned above, is not as effective as the cables, but you can try it to see if it works as well. Of course, you'll need some help doing it because someone has to push the car while you take care of things inside. If this doesn't work as well, then you can say goodbye to the dysfunctional battery and get a new one. Getting a new one won't cause problems for you and your family in the nearest future.